ALM3 Posted December 12, 2018 Share Posted December 12, 2018 Hi all. I've searched the threads and have not been able to find any information regarding the following questions for pressing information. I've decided to learn how to press. I'm still at the learning stage so I have not done anything with a book that has any value. To learn I am starting with the kaptainmyke tutorial found at https://www.youtube.com/channel/UCxg9DVfyqLWMREmEY6KAiCw It has been great and I have been able to see some of the magic that a press can do. Here are the questions: 1) I am curious as to the why abook needs to sit in the press for 12+ hours. When I started I was following the instructions and leaving it in there that long. For the last few books I've left it in the press for about 3 hours or until I can touch the hotplate of the press and it is room temperature. Any information would be appreciated. Is there any difference between leaving it in for 3 hours or 12? I can't detect any, but again I'm just getting started. 2) When do you humidify a book? Is it for every pressing or just the ones that have deep issues and the increase in humidity will help. For the few I have done, it has been the latter. I created the humidity chamber from the captain myke video above and it worked gangbusters...it just takes a lot of time. Do you dry press the book and see if it gets the flaws out first or do you start w/ the humidity? 3) In the lexicon of pressing is the "quick press" simply doing it without humidity and a "full press" doing it with. The time difference is substantial. 4) I have some books that were water damaged. The press took out the waviness from the cover but the pages are still not supple. Is that a good candidate for additional humidity in the chamber? Any info is appreciated. I'm really enjoying this aspect of the hobby. Link to comment Share on other sites More sharing options...
seanfingh Posted December 13, 2018 Share Posted December 13, 2018 via Imgflip Meme Generator Link to comment Share on other sites More sharing options...
Ditch Fahrenheit Posted December 13, 2018 Share Posted December 13, 2018 KaptainMyke 1 Link to comment Share on other sites More sharing options...
oldrover Posted December 13, 2018 Share Posted December 13, 2018 I’m grading and slabbing my own books now. These are my 9.8’s. ...well, now that I’m grading my own, all my comics are 9.8. Tony S 1 Link to comment Share on other sites More sharing options...
Kevin76 Posted December 13, 2018 Share Posted December 13, 2018 Don't listen to KaptainMyke about pressing...seriously. RockMyAmadeus, Logan510 and joeypost 3 Link to comment Share on other sites More sharing options...
Lazyboy Posted December 14, 2018 Share Posted December 14, 2018 32 minutes ago, Kevin76 said: Don't listen to KaptainMyke about pressing anything...seriously. Fixed. Seriously. RockMyAmadeus and KaptainMyke 2 Link to comment Share on other sites More sharing options...
ALM3 Posted December 14, 2018 Author Share Posted December 14, 2018 1 hour ago, Lazyboy said: Fixed. Seriously. Genuine question - whats the reason for the antipathy? Link to comment Share on other sites More sharing options...
Bomber-Bob Posted December 14, 2018 Share Posted December 14, 2018 (edited) On 12/12/2018 at 9:19 AM, ALM3 said: I've searched the threads and have not been able to find any information regarding the following questions for pressing information. Just what the world needs, another DIY presser. First off, there have been so many (too many) threads on this exact topic that I find it hard to believe you could not find anything. Many, including myself, frown upon these kind of threads. Pros that have spent many years fine tuning their skills generally do not wish to share. While I don't really care that you want to press your own books, eventually these books find their way into the marketplace. As a collector I am discouraged by the volume of bad pressings I see in the marketplace. The hobby doesn't need more pressers. However, if this is what you want to be when you grow up, then good luck. BTW, for better or worse, these threads usually end badly. Edited December 14, 2018 by Bomber-Bob Keys_Collector 1 Link to comment Share on other sites More sharing options...
RockMyAmadeus Posted December 14, 2018 Share Posted December 14, 2018 6 hours ago, Lazyboy said: 6 hours ago, Kevin76 said: Don't listen to KaptainMyke about pressing anything...seriously. Fixed. Seriously. Yes. While there is some information in that video, there is much that is wrong, and will result in either damage to the book, or flaws coming back over time. Tony S 1 Link to comment Share on other sites More sharing options...
Kevin76 Posted December 15, 2018 Share Posted December 15, 2018 I press my own books..screw me I guess. Link to comment Share on other sites More sharing options...
Gaard Posted December 15, 2018 Share Posted December 15, 2018 I may be wrong (it happens from time to time), but didn't every single presser in the world start off as a DIY presser? Mars76, Joosh and Ride the Tiger 3 Link to comment Share on other sites More sharing options...
dfx1 Posted December 15, 2018 Share Posted December 15, 2018 On 12/13/2018 at 6:10 PM, oldrover said: I’m grading and slabbing my own books now. These are my 9.8’s. ...well, now that I’m grading my own, all my comics are 9.8. 9.8? That corner is toast. Blunt the knives and bend the forks! Smash the bottles and burn the corks! Chip the glasses and crack the plates! That's what Bilbo Baggins hates - Link to comment Share on other sites More sharing options...
Kevin76 Posted December 15, 2018 Share Posted December 15, 2018 10 hours ago, Gaard said: I may be wrong (it happens from time to time), but didn't every single presser in the world start off as a DIY presser? Of course but some people have had training who showed them what and what not to do, some have done it through trial and error. It's the DIY pressers who think they know what they are doing (KaptainMyke) are the ones who need to stop pressing Logan510 1 Link to comment Share on other sites More sharing options...
Kevin76 Posted December 15, 2018 Share Posted December 15, 2018 (edited) 4 minutes ago, Tony Squawk said: Yeah, I think most Boardies have been saying that since 2002. No, just you. I'm ok with that. I see you're on your trolling account again. Edited December 15, 2018 by Kevin76 Link to comment Share on other sites More sharing options...
Kevin76 Posted December 16, 2018 Share Posted December 16, 2018 2 hours ago, Tony Squawk said: c'mon now, you KNOW for a fact that's not true. Either way, I couldn't careless, it's not like I hang out with anyone from the boards or ever plan to. Link to comment Share on other sites More sharing options...
Hero Restoration Posted December 20, 2018 Share Posted December 20, 2018 Surprisingly, you can accomplish a lot of DYI projects from YouTube videos, but comic book pressing is not one of those. Anyone willing to share their process is either not doing it right, or not sharing all the information needed to do it correctly. Part time effort won't cut it in many cases, you need to be in it as a career if you seriously want to pursue pressing, and that pie is continually shrinking, so good luck if you decide to do so. As others have mentioned, doing it for fun would be okay, except these books end up in the market at some point. Not to mention you won't have many comic friends if they know you are ruining good books, by pressing or any other action. Bomber-Bob, comicdonna and paul747 3 Link to comment Share on other sites More sharing options...
paul747 Posted December 20, 2018 Share Posted December 20, 2018 4 hours ago, MastrCntrlProgram said: Surprisingly, you can accomplish a lot of DYI projects from YouTube videos, but comic book pressing is not one of those. Anyone willing to share their process is either not doing it right, or not sharing all the information needed to do it correctly. Part time effort won't cut it in many cases, you need to be in it as a career if you seriously want to pursue pressing, and that pie is continually shrinking, so good luck if you decide to do so. As others have mentioned, doing it for fun would be okay, except these books end up in the market at some point. Not to mention you won't have many comic friends if they know you are ruining good books, by pressing or any other action. +1 Link to comment Share on other sites More sharing options...
Ride the Tiger Posted December 21, 2018 Share Posted December 21, 2018 On 12/15/2018 at 5:43 AM, Gaard said: I may be wrong (it happens from time to time), but didn't every single presser in the world start off as a DIY presser? Exactly. For some reason it is ok to pursue basically anything on this board with the exception of learning to press books. Why? I have no idea. I guess there are enough of them already? Kinda like telling a kid playing baseball not to try and play in the major leagues because there are too many baseball players already. Now watch as I catch poop for my comparison. I'll get the old "you can't even begin to compare the two" line. Never set your goals high. You might reach them. Link to comment Share on other sites More sharing options...
The Lions Den Posted December 21, 2018 Share Posted December 21, 2018 I certainly applaud your desire to learn something new and have fun doing it. However, since learning how to properly press comic books appears to be a rather painstaking process with little margin for error, I would suggest using books that are essentially worthless until you feel completely confident in your ability. Good luck and happy holidays! Robert_L, oldrover and newshane 3 Link to comment Share on other sites More sharing options...
oldrover Posted December 21, 2018 Share Posted December 21, 2018 13 hours ago, The Lions Den said: I certainly applaud your desire to learn something new and have fun doing it. However, since learning how to properly press comic books appears to be a rather painstaking process with little margin for error, I would suggest using books that are essentially worthless until you feel completely confident in your ability. Good luck and happy holidays! I now am embarrassed that this was not my first response to this. Hear, hear! Robert_L 1 Link to comment Share on other sites More sharing options...