Kevin76 Posted December 24, 2018 Share Posted December 24, 2018 Anyone can buy a press, put a book in and have it come out looking better than it did going in, but if you run into a problem, how do you fix it? It's like someone who can take out and put in car parts doesn't mean you can call yourself a mechanic. KaptainMyke 1 Link to comment Share on other sites More sharing options...
Ride the Tiger Posted December 24, 2018 Share Posted December 24, 2018 I guess if you run into a problem when pressing and aren't considered a professional you just give up. Just like anything else. If you get turned down for a date just give up. If you make a mistake on your bank statement just give up. Trying again is never an option people. Link to comment Share on other sites More sharing options...
The Less Blob Posted December 29, 2018 Share Posted December 29, 2018 If cgc started putting "amateur pressing" on labels of books that have obviously been badly pressed maybe that would change things joeypost, Bomber-Bob and namisgr 3 Link to comment Share on other sites More sharing options...
KaptainMyke Posted January 4, 2019 Share Posted January 4, 2019 Link to comment Share on other sites More sharing options...
Poka Posted January 4, 2019 Share Posted January 4, 2019 On 12/14/2018 at 2:27 PM, RockMyAmadeus said: Yes. While there is some information in that video, there is much that is wrong, and will result in either damage to the book, or flaws coming back over time. That it a bit of a cheap snipe appreciate if you could give 1 or 2 examples of the described processes which will result in damages or reversion of flaws Link to comment Share on other sites More sharing options...
paul747 Posted January 4, 2019 Share Posted January 4, 2019 Just now, Poka said: That it a bit of a cheap snipe appreciate if you could give 1 or 2 examples of the described processes which will result in damages or reversion of flaws How about the xxxxxxx for one. 2 the xxxxxxxx, 3 the xxxxx and time.... and more. Link to comment Share on other sites More sharing options...
Logan510 Posted January 4, 2019 Share Posted January 4, 2019 1 hour ago, Poka said: That it a bit of a cheap snipe appreciate if you could give 1 or 2 examples of the described processes which will result in damages or reversion of flaws Isn't he the same guy who originally said that water ( humidity ) was the enemy of paper and so he was going to do just dry heat pressing? The same guy who launched a business after nearly pressing 100 books or something like that? Link to comment Share on other sites More sharing options...
joeypost Posted January 4, 2019 Share Posted January 4, 2019 On 12/29/2018 at 6:14 PM, the blob said: If cgc started putting "amateur pressing" on labels of books that have obviously been badly pressed maybe that would change things They will list flaws associated with a poor pressing. Link to comment Share on other sites More sharing options...
oldrover Posted January 4, 2019 Share Posted January 4, 2019 On 12/23/2018 at 11:21 PM, Kevin76 said: Anyone can buy a press, put a book in and have it come out looking better than it did going in, but if you run into a problem, how do you fix it? It's like someone who can take out and put in car parts doesn't mean you can call yourself a mechanic. Yeah... I have to admit I thought of doing some 'DIY-pressing' when I first started selling of my stash... but why? At max I'd have 50 books to press. Plus I'd have to learn and practice for hours, and still come up way short especially when it comes to spine rolls and more involved work. As long as you're patient, why not get a professional result from a professional presser? (rhetorical question... no need to respond ) Bomber-Bob 1 Link to comment Share on other sites More sharing options...
RockMyAmadeus Posted January 4, 2019 Share Posted January 4, 2019 5 hours ago, Poka said: On 12/13/2018 at 10:27 PM, RockMyAmadeus said: Yes. While there is some information in that video, there is much that is wrong, and will result in either damage to the book, or flaws coming back over time. That it a bit of a cheap snipe appreciate if you could give 1 or 2 examples of the described processes which will result in damages or reversion of flaws I don't think your understanding of the phrase "cheap snipe" is quite accurate. An example is the use of a board in the center of the book. Do not do this. Ever. Link to comment Share on other sites More sharing options...
Poka Posted January 4, 2019 Share Posted January 4, 2019 40 minutes ago, RockMyAmadeus said: I don't think your understanding of the phrase "cheap snipe" is quite accurate. An example is the use of a board in the center of the book. Do not do this. Ever. thank you. what is the effect of using a board in the center of the book? Link to comment Share on other sites More sharing options...
Poka Posted January 4, 2019 Share Posted January 4, 2019 5 hours ago, Logan510 said: Isn't he the same guy who originally said that water ( humidity ) was the enemy of paper and so he was going to do just dry heat pressing? The same guy who launched a business after nearly pressing 100 books or something like that? he has created a fb group. if you go to the group - no he does not dry heat press only - he actually created a video how to create your own humidity chamber. his results are actually impressive - of the key books he presses - he shares pictures before / after before CGC grading - as well as CGC graded pictures once received back. incl books i have sold him however whether any of his presses will reverse - only time will tell. Link to comment Share on other sites More sharing options...
Logan510 Posted January 4, 2019 Share Posted January 4, 2019 3 minutes ago, Poka said: he has created a fb group. if you go to the group - no he does not dry heat press only - he actually created a video how to create your own humidity chamber. his results are actually impressive - of the key books he presses - he shares pictures before / after before CGC grading - as well as CGC graded pictures once received back. incl books i have sold him however whether any of his presses will reverse - only time will tell. I'm not going to his group, but thank you anyway. Link to comment Share on other sites More sharing options...
Bomber-Bob Posted January 5, 2019 Share Posted January 5, 2019 2 hours ago, RockMyAmadeus said: An Example is the use of a board in the center of the book. Do not do this. Ever. It seems intuitively obvious to me that placing a board inside the cover and applying a press can't possibly work. It may get rid of an edge crease or whatever he was trying to fix but it would incur a new crease or bend along the edge of the board. That's just crazy. RockMyAmadeus 1 Link to comment Share on other sites More sharing options...
Tony S Posted January 5, 2019 Share Posted January 5, 2019 6 hours ago, Poka said: thank you. what is the effect of using a board in the center of the book? This is why pros DO NOT answer questions. It's just more and more and more questions. "Explain why this is wrong" is just another way of asking "how do you do it right?" No one is going down that road. speedcake and RockMyAmadeus 2 Link to comment Share on other sites More sharing options...
speedcake Posted January 6, 2019 Share Posted January 6, 2019 I’d think the obvious and easiest way for someone to answer that question would be to try it on cheap-o books and find out. This thread has been hilarious and informative all at the same time Link to comment Share on other sites More sharing options...
dfx1 Posted January 6, 2019 Share Posted January 6, 2019 (edited) Pressing seems really fun. Who wouldn't want to try. Edited January 6, 2019 by dfx1 Link to comment Share on other sites More sharing options...
Ride the Tiger Posted January 7, 2019 Share Posted January 7, 2019 17 hours ago, dfx1 said: Pressing seems really fun. Who wouldn't want to try. Oh you can't try that's only for professionals. 50 years from now there will be no pressers because everyone that wanted to learn came here and was told to leave it to the professionals. So when they have all passed on to the next life no one will know what to do. And of course none of the professionals out there bought their pressers. They all built them from scratch like Macgyver with their own hands. Don't go talkin crazy. Pressing can't be fun or educational. Its the Calgon of the comic industry. Link to comment Share on other sites More sharing options...