C_Venom Posted February 8, 2022 Share Posted February 8, 2022 Couple questions, this would be a green label correct and what do ya'll think this would grade at? Link to comment Share on other sites More sharing options...
marvelmaniac Posted February 8, 2022 Share Posted February 8, 2022 I see bindery tears, upper staple not flush, very slight nick at top right corner. The book will receive a Green Label due to the writing/SIG on the cover unless you request a Blue Label then the writing will be viewed as a defect and the grade will be much lower. IMO, the top staple detracts from the aesthetic appeal of the book, so... 9.2 NEAR MINT- (NM-): Back to TopNearly perfect with only a minor additional defect or defects that keep it from Near Mint. A limited number of minor bindery/printing defects are allowed. Cover is flat with no surface wear. Inks are bright with only the slightest dimming of reflectivity. Corners are cut square and sharp with ever-so-slight blunting permitted. A 1/16-1/8" bend is permitted with no color break. Small, inconspicuous, lightly penciled, stamped or inked arrival dates are acceptable as long as they are in an unobtrusive location. Slight foxing. Spine is tight and flat. Staples may show some discoloration. Almost no stress lines. Paper is off-white to cream, supple and fresh. Slight interior tears are allowed. Link to comment Share on other sites More sharing options...
C_Venom Posted February 8, 2022 Author Share Posted February 8, 2022 Thank you much marvelmaniac 1 Link to comment Share on other sites More sharing options...
Funnybooks Posted February 10, 2022 Share Posted February 10, 2022 yes, green 9.4 on a good day Link to comment Share on other sites More sharing options...
Galen130 Posted February 10, 2022 Share Posted February 10, 2022 Yup, most likely green label. 9.2-ish Link to comment Share on other sites More sharing options...
grendelbo Posted February 12, 2022 Share Posted February 12, 2022 Need back cover pics. Galen130 1 Link to comment Share on other sites More sharing options...