• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

I got Issues

Member
 View Profile  See their activity

  • Posts

    5

  • Joined

  • Last visited

 Content Type 

Everything posted by I got Issues

  1. I got Issues
    This is the bearing the guy at Bearing Headquarters found for me. I took the old bearing washers in with me so if he needed them he could measure them too. He wen't through everything in his system. https://www.bdiexpress.com/ca/en/Bearings/Ball-Bearings/Thrust-Ball-Bearing/D14/p/1172679 ^that bearing is the only one he found that would work. He gave me a much better price than what that place wants... still pricey. I was just curious if anyone else had replaced it and where. I might order this one next week (he has to ship it in from Chicago... only one they have in stock) Edit: It's only a one way bearing. Might just get it and use it until I can find a better deal on a 2-way.
  2. I got Issues
    I did that, even used calipers to make sure I was dead on with the mesurments. Went to a local retailer that specializes in bearings. They found one bearing that "might" work. That inside Diameter is where I'm running into issues. Bearings are either too small, or way over from what ive seen... that's why I was asking if anyone had any advice.
  3. I got Issues
    Wondering if anyone has advice on where to find the Thrust Bearing to replace the original? The washers were fine, but the bearing itself was rusted almost to dust. Figured it would be easy to find one compatible, but having issues. Wanted to totally referb it with a new sand and paint job.
  4. I got Issues
    I had actually graded it much lower. Thanks for the look. About the missing staples, how much does that affect the grade? As I said I've never run into it before.
  5. I got Issues
    I belong to another comic forum and they directed me here on figuring out how to grade this. Hulk 182 factory error no staples (MVS intact). Front cover where the hulk is under the price box has 2 small staple holes, but they don't impact the 1st page. Everything else affecting the book is pretty apparent. Just having trouble figuring out how to grade it, since I've never run into anything like this before, and would appreciate any input. Thanks in advance. Front https://photos.app.goo.gl/FyGAtYLit9YDzCpC6 Back https://photos.app.goo.gl/yaJ1Cvg4MArrjaHNA