• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

nonquixote

Member
  • Posts

    13
  • Joined

  • Last visited

Posts posted by nonquixote

  1. Your copy might not be worth pressing, but square bound books can be pressed. In fact a good pressing can help with staple bumps that might already be there. The trick is to press with a flat surface sandwiched under the front and back covers. Also, be careful not to put pressure directly on the spine since it can cause it to become rounded. I leave the spine protruding over the edge of the press about 1/16 of an inch or so, just enough to prevent it getting squashed.

  2. There are a lot of defects that are basically invisible without close inspection (finger prints, finger bends, slight waviness, tiny spine ticks, etc.) that will detract from the final grade. Moderate flaws more so than slight ones, and the more that are present the lower the grade will be. They all add up and WILL be seen by the grader. There are a lot of 8.0+ books that on first glance look almost indistinguishable from 9.8s.

  3. I don't read comics anymore. I started collecting in the 1970's, and loved the stories. Now though, panel by panel storytelling doesn't do anything for me. I still appreciate the cover art, the nostalgia factor, and the value of my books, but I'm no longer a comic reader, and prefer novels.

  4. I think it's no better than a 6.0. As a general rule restoration does little to raise value unless it's a really rare classic book such as Action Comics #1 in really bad shape. To make it more presentable you can press it yourself using a clothes iron, some backer boards, and some parchment paper. Look up some YouTube videos on that before trying it. Be careful not to set the iron's temperature too high, somewhere around the wool setting or medium should be OK. With your book in its current condition you are unlikely to do much harm as long as you don't scorch it, and you can at least flatten out the edges and smooth any waviness that way.