PGM SILVER SURFER 1 4 4

[WolverineX]

On 3/14/2022 at 5:18 PM, JollyComics said:

@Wolverinex  You can check your own reflection.

okay not too much in the reflection.  Here's some photos.  Plus the inversion photo.

 

 

[WolverineX]

On 3/14/2022 at 5:15 PM, JollyComics said:

Now you can see the reflection on the surface of the book.

If anything is not natural or odd object on the book, you may have the answer.

 

[MrRoboto]

6.0 and with pics here I see no color touch, print defect.

[topcat54]

Take it out of the bag and look

[JollyComics]

On 3/14/2022 at 4:43 PM, Wolverinex said:

 

  No color touch!

[The Lions Den]

On 3/14/2022 at 3:59 PM, JollyComics said:

@The Lions Den

Printing defect?

Well, this book typically has its share of printing defects, most notably the tiny circular spots on the lower edge of the front cover. But that yellow area near the spine was actually supposed to be black, not yellow. So yes, I would say a manufacturing defect there. 

As far as color touch goes, I'd expect to see something in the areas that show distinct wear, such as the crease on the lower left corner of the front cover. And the black area along the edge of the spine would be another typical area, as well as the remaining corners and edges of the front cover. If you can't see anything in these areas, the chance of there being any color touch on this book becomes much less likely, IMO...  

 

[Februus]

I’m at 6.0 nothing in the pics that is visible to indicate color touch. The back of the front cover will show it usually because the ink often bleeds through. 

Edited March 15, 2022 by Februus