Carlo M Posted January 22, 2023 Share Posted January 22, 2023 I am starting this thread with a specific question. Is not UXM 286 Jim Lee layouts, Portacio pencilis and Williams inks? Maybe Scott can help on the proper attribution for this piece (I am not the consignor here...) Comic Link :: The Online Vintage Comic Book and Comic Art Auction and Exchange Carlo Link to comment Share on other sites More sharing options...
Popular Post stinkininkin Posted January 22, 2023 Popular Post Share Posted January 22, 2023 On 1/22/2023 at 6:13 AM, Carlo M said: I am starting this thread with a specific question. Is not UXM 286 Jim Lee layouts, Portacio pencilis and Williams inks? Maybe Scott can help on the proper attribution for this piece (I am not the consignor here...) Comic Link :: The Online Vintage Comic Book and Comic Art Auction and Exchange Carlo You are correct Carlo. I sent Comiclink a notification email that I am sharing below... "Incorrect credits. I inked the entire issue (even though that issues credits list Art Thibert as inker, this was a hasty editorial mistake. I definitely inked the entire issue). Joe Rubenstein had nothing to do with this page. Also, Jim Lee provided loose storytelling breakdowns for the art, and Whilce Portacio provided all the completed pencils." Best Scott PixelPusher, Will_K, F For Fake and 7 others 10 Link to comment Share on other sites More sharing options...
Carlo M Posted January 22, 2023 Author Share Posted January 22, 2023 Thought so... as usual timely response. Thanks Scott! Carlo Link to comment Share on other sites More sharing options...
RBerman Posted January 23, 2023 Share Posted January 23, 2023 (edited) On 1/22/2023 at 11:33 AM, stinkininkin said: You are correct Carlo. I sent Comiclink a notification email that I am sharing below... "Incorrect credits. I inked the entire issue (even though that issues credits list Art Thibert as inker, this was a hasty editorial mistake. I definitely inked the entire issue). Joe Rubenstein had nothing to do with this page. Also, Jim Lee provided loose storytelling breakdowns for the art, and Whilce Portacio provided all the completed pencils." Best Scott ComicLink has now corrected the entry, citing you. Edited January 23, 2023 by RBerman Twanj, gumbydarnit and F For Fake 3 Link to comment Share on other sites More sharing options...
Chaykin Stevens Posted January 23, 2023 Share Posted January 23, 2023 (edited) GCD says: -script Whilce Portacio (plot); Jim Lee (plot); Scott Lobdell (-script) Pencils Whilce Portacio (layouts); Jim Lee (layouts); Scott Clark Inks Scott Williams (pages 1-6, 8-15, 21); Joe Rubinstein (page 18); Bill Sienkiewicz (page 16) Colors Joe Rosas Letters Tom Orzechowski (credited as Task Force X); Lois Buhalis (credited as Task Force X) Indexer Notes Scott Clark pencils and inking credits from Facebook post by Scott Williams. Edited January 23, 2023 by Chaykin Stevens Link to comment Share on other sites More sharing options...
PhilipB2k17 Posted January 23, 2023 Share Posted January 23, 2023 One of the very underrated parts of this Hobby is that it often corrects creator credits and attributions. gumbydarnit 1 Link to comment Share on other sites More sharing options...
Popular Post comix4fun Posted January 24, 2023 Popular Post Share Posted January 24, 2023 On 1/22/2023 at 9:47 PM, RBerman said: ComicLink has now corrected the entry, citing you. And they posted the correction with a wonderful graphic to comfort the bidders: Hearing it from the source likely helps the piece quite a bit. So, glad Scott is an active member of the community. TupennyConan, lb jefferies, tth2 and 3 others 6 Link to comment Share on other sites More sharing options...
stinkininkin Posted January 24, 2023 Share Posted January 24, 2023 I went back and looked, and unfortunately, my correction needs to be...corrected. THE PAGE IN QUESTION is just as I said, Jim Lee on rough breakdowns, Whilce Portacio on finished pencils, and myself on inks. Case closed. Unfortunately, I posted that I inked the entire issue of Uncanny Xmen 286, but for some reason I had it confused with Uncanny Xmen 289. I only inked 16 of the 22 pages from 286. Apologies for the misstatement about inking the entire issue. Again, this page from this Comic Link auction is now CORRECTLY listed as Lee/Portacio/Williams, so bid with confidence. ThothAmon, Twanj and gumbydarnit 3 Link to comment Share on other sites More sharing options...
gumbydarnit Posted January 24, 2023 Share Posted January 24, 2023 Scott we've all been there. I shoot for a 70% correct facts rate ; ) Link to comment Share on other sites More sharing options...
Popular Post comix4fun Posted January 24, 2023 Popular Post Share Posted January 24, 2023 On 1/24/2023 at 9:49 AM, stinkininkin said: I went back and looked, and unfortunately, my correction needs to be...corrected. THE PAGE IN QUESTION is just as I said, Jim Lee on rough breakdowns, Whilce Portacio on finished pencils, and myself on inks. Case closed. Unfortunately, I posted that I inked the entire issue of Uncanny Xmen 286, but for some reason I had it confused with Uncanny Xmen 289. I only inked 16 of the 22 pages from 286. Apologies for the misstatement about inking the entire issue. Again, this page from this Comic Link auction is now CORRECTLY listed as Lee/Portacio/Williams, so bid with confidence. Do you know how hard it was to get the tablet engraver to do that job after hours? delekkerste, lb jefferies, stinkininkin and 7 others 10 Link to comment Share on other sites More sharing options...
Popular Post stinkininkin Posted January 24, 2023 Popular Post Share Posted January 24, 2023 On 1/24/2023 at 8:22 AM, comix4fun said: Do you know how hard it was to get the tablet engraver to do that job after hours? The engraver created the Earth in less than a week, so I doubt just banging out a couple of quick tablet edits was as tough as all that. Twanj, tth2, John E. and 4 others 3 4 Link to comment Share on other sites More sharing options...
Popular Post comix4fun Posted January 24, 2023 Popular Post Share Posted January 24, 2023 On 1/24/2023 at 1:25 PM, stinkininkin said: The engraver created the Earth in less than a week, so I doubt just banging out a couple of quick tablet edits was as tough as all that. It's just all the candles I had to light and goats sacrificed. Wait he just answered me back on the edits..... buttock, tth2, TupennyConan and 4 others 7 Link to comment Share on other sites More sharing options...
Popular Post batman_fan Posted February 1, 2023 Popular Post Share Posted February 1, 2023 Not sure about anyone else but I am VERY interested to see what one Doc Oct arm is worth davidtere, Phill the Governor, delekkerste and 4 others 7 Link to comment Share on other sites More sharing options...
Popular Post Bronty Posted February 2, 2023 Popular Post Share Posted February 2, 2023 Might be more than you think because there are TWO arms there! batman_fan, davidtere, John E. and 2 others 5 Link to comment Share on other sites More sharing options...
John E. Posted February 2, 2023 Share Posted February 2, 2023 On 2/1/2023 at 9:05 AM, batman_fan said: Not sure about anyone else but I am VERY interested to see what one Doc Oct arm is worth One arm and one leg? PhilipB2k17 1 Link to comment Share on other sites More sharing options...
buttock Posted February 2, 2023 Share Posted February 2, 2023 On 2/1/2023 at 8:05 AM, batman_fan said: Not sure about anyone else but I am VERY interested to see what one Doc Oct arm is worth Mathematically you can model this using the Maxwell equations. H is the number of Dr. Octopus arms and E is the proximity to a dealer's inventory. tth2 and batman_fan 2 Link to comment Share on other sites More sharing options...
batman_fan Posted February 2, 2023 Share Posted February 2, 2023 (edited) On 2/2/2023 at 7:11 AM, Bronty said: Might be more than you think because there are TWO arms there! I was wondering how long until someone brought up that 2nd arm. Big question does it go as Price = $ x #arms or Price = $ ^ #arms Edited February 2, 2023 by batman_fan Link to comment Share on other sites More sharing options...
PhilipB2k17 Posted February 2, 2023 Share Posted February 2, 2023 On 1/24/2023 at 11:22 AM, comix4fun said: Do you know how hard it was to get the tablet engraver to do that job after hours? Link to comment Share on other sites More sharing options...
PhilipB2k17 Posted February 2, 2023 Share Posted February 2, 2023 On 2/1/2023 at 10:05 AM, batman_fan said: Not sure about anyone else but I am VERY interested to see what one Doc Oct arm is worth How "hot" is Octomom if she only had two kids rather than 8? Link to comment Share on other sites More sharing options...
PhilipB2k17 Posted February 2, 2023 Share Posted February 2, 2023 (edited) On 1/24/2023 at 2:54 PM, comix4fun said: It's just all the candles I had to light and goats sacrificed. Wait he just answered me back on the edits..... Edited February 2, 2023 by PhilipB2k17 delekkerste, comix4fun and davidtere 3 Link to comment Share on other sites More sharing options...