Homeboy32 Posted May 14 Share Posted May 14 (edited) I submitted my already graded Avengers 58 (CGC #4410215001) for a clean, press, and regrade. Received the comic back to today and disappointed that the same, large crease is still present on the back cover . This should be a pressable defect as it's non color breaking. The grade came back the same with the same grader notes: -Very light crease left top of back cover. -Very light crease right top of back cover. -Very light spine stress lines to cover. Came back the same grade as before the press, which is fine I suppose. But the same crease(s) are still present and I was pretty sure this could be pressed to 9.4. I sent CGC an email but wasn't given the option to upload pictures, just describe the issue. The first three pictures are after press. The last two pictures are before press. Thoughts? @CGC Mike Can you suggest any ideas? Edited May 14 by Homeboy32 Update information Link to comment Share on other sites More sharing options...
RockMyAmadeus Posted May 14 Share Posted May 14 Link to comment Share on other sites More sharing options...
Administrator CGC Mike Posted May 14 Administrator Share Posted May 14 Hi @Homeboy32 Let me check with management regarding this and get back to you. Mike Link to comment Share on other sites More sharing options...
Homeboy32 Posted May 14 Author Share Posted May 14 On 5/13/2024 at 8:59 PM, CGC Mike said: Hi @Homeboy32 Let me check with management regarding this and get back to you. Mike Thanks. The original submission number is 4410215. CGC Mike 1 Link to comment Share on other sites More sharing options...
newshane Posted May 14 Share Posted May 14 Name that TV show... Link to comment Share on other sites More sharing options...
LordRahl Posted May 14 Share Posted May 14 It doesn't need to break color for it to not be a good pressing candidate, especially with a white back cover, there really is no color for it to break. If the paper fibers are broken, no amount of pressing is going to put them back together. Pressing might flatten the crease but the crease will still be there. The pictures aren't great but it looks like the paper fibers are broken. Mr. Zipper and thehumantorch 2 Link to comment Share on other sites More sharing options...
Homeboy32 Posted May 14 Author Share Posted May 14 On 5/13/2024 at 11:12 PM, LordRahl said: It doesn't need to break color for it to not be a good pressing candidate, especially with a white back cover, there really is no color for it to break. If the paper fibers are broken, no amount of pressing is going to put them back together. Pressing might flatten the crease but the crease will still be there. The pictures aren't great but it looks like the paper fibers are broken. Comparing the crease on my comic versus CGC's example of pressing creases on the "Pressing" tab, it looks very similar. The problem is that the paper is still bent, not flattened. I do not see broken fibers in the comic. Link to comment Share on other sites More sharing options...
Administrator CGC Mike Posted May 14 Administrator Share Posted May 14 @Homeboy32 You can send this back as a ME. Do it as holder defect. On the packing slip be sure to write This ME has been pre approved. ATTN: Matt Nelson and write the problem. Also, be sure to send me the tracking number when it ships. GregHa 1 Link to comment Share on other sites More sharing options...
Jimmy Linguini Posted May 14 Share Posted May 14 Ask yourself, is CGC actually pressing the books or are you just paying for a grade bump? newshane and comicparadox 1 1 Link to comment Share on other sites More sharing options...
vheflin Posted May 14 Share Posted May 14 On 5/13/2024 at 10:18 PM, newshane said: Name that TV show... MASH? Link to comment Share on other sites More sharing options...
Homeboy32 Posted May 14 Author Share Posted May 14 Great. Thanks alot @CGC Mike . Do you have an email address that I can send for the tracking information or just update in this thread? Also, what exactly is ME? Link to comment Share on other sites More sharing options...
Administrator CGC Mike Posted May 15 Administrator Share Posted May 15 Hi A ME stands for Mechanical Error. You would need to fill out a submission form like you did when you sent this book in. This time, you would select Mechanical Error. (Holder defect) When you finish the submission form, a prepaid shipping label will be sent to you through our website. (Not by e-mail). Be sure to write on the packing slip: This ME has been pre approved. ATTN: Matt Nelson and write the problem. (Make sure ATTN: Matt Nelson stands out). You would then include the packing slip with the book and ship it back to us using the prepaid shipping label. We will fix this at our expense and ship it back to you on our dime as well. When you have a tracking number you can send it to me by using the private message feature on this forum. (the envelope in the upper right of the screen). I will then send it to Matt so he can be on the lookout for your package. If you have any problems with this, you can send me a PM or post it in the thread. The ME option on the submission form expires in 14 days after you have received your submission back from us. If this happens, let me know and I can get you one. Mike crazyhips 1 Link to comment Share on other sites More sharing options...
Popular Post Tony S Posted May 15 Popular Post Share Posted May 15 I am surprised no one has mentioned it - so I will. This doesn't look like an issue with pressing. This is an encapsulation issue. The book has cover overhang - the cover is a a bit larger than the interior pages of the book. The inner well is bending that overhang down. I've had books CGC would not encapsulate because the overhang was enough that they knew the outer edge(s) of the cover would be bent down. You could press the paper back flat - but the same thing is going to happen as soon as you encapsulate it and then have the book shift around a bit during shipping. This is one of the problems the original Generation 2 holder was supposed to solve. As people probably recall, there was no sealed inner well. The books were sandwiched between two sheets of Mylar - with the outer holder applying pressure to hold the books in place. But problems with uneven pressure caused bends/waves in the books. The other grading companies use a tampered seal all along the outside edge of the inner holder. This is far less likely to bend over and damage overhang. But the books also have a bit more space to move around - which can cause it's own set of problems. Most often little tears at the staples. The real solution is to treat comic books with noticeable cover overhang as "do not grade and encapsulate". RockMyAmadeus, The Lions Den, Paul Kosnik and 3 others 6 Link to comment Share on other sites More sharing options...
Homeboy32 Posted May 15 Author Share Posted May 15 That is correct. The book was bent from the original CGC case, which are the last 2 pictures. That's the biggest reason why I decided to have it cracked out and pressed to fix that issue. However, the book still came back with the bend. I understand the crease may not be perfect after press, but it's the fact that it's still bent is the issue. Tony S 1 Link to comment Share on other sites More sharing options...
Tony S Posted May 18 Share Posted May 18 On 5/15/2024 at 5:38 PM, Homeboy32 said: That is correct. The book was bent from the original CGC case, which are the last 2 pictures. That's the biggest reason why I decided to have it cracked out and pressed to fix that issue. However, the book still came back with the bend. I understand the crease may not be perfect after press, but it's the fact that it's still bent is the issue. It's just going to get bent down again by the inner holder. I don't believe pressing is the problem. The problem is the cover hangs too far over the interior pages of the book and the inner well will bend it down. If CGC doesn't make the inner well fairly snug then the book can slide around which causes other - and potentially worse - problems. RockMyAmadeus 1 Link to comment Share on other sites More sharing options...
RockMyAmadeus Posted May 18 Share Posted May 18 (edited) On 5/14/2024 at 9:26 PM, Tony S said: the overhang was enough that they knew the outer edge(s) of the cover would be bent down. Edited May 18 by RockMyAmadeus Tony S 1 Link to comment Share on other sites More sharing options...
jgarner60 Posted May 20 Share Posted May 20 Yeah I sent a tomb of dracula 10 in. Absolutely beautiful copy no issues. Came back an 8.0. Grader notes said small tear on rear cover that 100 percent was not there prior to their cleaning and pressing. Another book had grader notes slight crease . Pressing should have easily taken that out. So I am done with cgc pressing. It just seems like they might be a victim of their own success. Too many books coming in and they r just rushing through them with maybe some employees that don't care or understand how big of a deal in some of these books those screw ups can cost. On another note the grading is all over the place. I sent in a ultimate fallout 4 first print. Bought raw pulled it out the polybag myself. Beautiful book zero issues. Got it pressed and graded all of a sudden had light spine stress came back a 9.2. I thought that was low. Removed it carefully and checked the spine. Couldent see any. So resubmitted it. Just came back an 8.0. Wtf. Same grader note. There's no consistency and an 8.0 makes zero sense. Once again a victim of their own success and hiring people that don't care or don't know what they r doing. Link to comment Share on other sites More sharing options...