Jayman Posted February 19, 2023 Share Posted February 19, 2023 On 2/19/2023 at 5:16 AM, Kerdese said: A little more updating and upgrading of books. Annoys me that I think about this stuff more than I should. Great looking room but I absolutely love this drafting table! Kerdese 1 Link to comment Share on other sites More sharing options...
DELTA 62 Posted February 19, 2023 Share Posted February 19, 2023 On 2/19/2023 at 3:16 AM, Kerdese said: A little more updating and upgrading of books. Annoys me that I think about this stuff more than I should. Nice set up! I apologize if this has been asked before... what are you using to hang up your slabs like that? Kerdese 1 Link to comment Share on other sites More sharing options...
batman_fan Posted February 19, 2023 Share Posted February 19, 2023 On 2/19/2023 at 12:10 PM, lizards2 said: Hey - we just bought a table top for the comic room - I was just going to put wire shelves underneath for storage, but this may be a better option - do you have a source of supply for those electric legs? Amazon has a decent selection at a reasonable price. Just make sure to get a dual motor. I may have to use fixed legs because my top is about 300lbs. Link to comment Share on other sites More sharing options...
Kerdese Posted February 19, 2023 Share Posted February 19, 2023 On 2/19/2023 at 4:59 PM, DELTA 62 said: Nice set up! I apologize if this has been asked before... what are you using to hang up your slabs like that? Can’t remember how I found these, but they work perfect. You can even use them to put your books on shelves, which is what you see in my display case. Jayman, ADAMANTIUM and DELTA 62 2 1 Link to comment Share on other sites More sharing options...
Popular Post Kerdese Posted February 19, 2023 Popular Post Share Posted February 19, 2023 (edited) Here are some better photos. Edited February 19, 2023 by Kerdese MultiSig Mike, Microchip, DELTA 62 and 4 others 5 2 Link to comment Share on other sites More sharing options...
Popular Post djpinkpanther67 Posted February 19, 2023 Popular Post Share Posted February 19, 2023 Here’s my comic room in all its glory. Don’t judge. It’s mostly unfinished. Mostly. grendelbo, lizards2, Poekaymon and 2 others 5 Link to comment Share on other sites More sharing options...
lizards2 Posted February 19, 2023 Share Posted February 19, 2023 On 2/19/2023 at 3:10 PM, Kerdese said: Here are some better photos. You have nice lips. ThothAmon, Kerdese and grendelbo 3 Link to comment Share on other sites More sharing options...
lizards2 Posted February 19, 2023 Share Posted February 19, 2023 On 2/19/2023 at 3:01 PM, batman_fan said: On 2/19/2023 at 11:10 AM, lizards2 said: Hey - we just bought a table top for the comic room - I was just going to put wire shelves underneath for storage, but this may be a better option - do you have a source of supply for those electric legs? Expand Amazon has a decent selection at a reasonable price. Just make sure to get a dual motor. I may have to use fixed legs because my top is about 300lbs. Cool - I wanna say mine is only 35-40 lbs. Link to comment Share on other sites More sharing options...
batman_fan Posted February 19, 2023 Share Posted February 19, 2023 On 2/19/2023 at 4:16 PM, lizards2 said: Cool - I wanna say mine is only 35-40 lbs. The Amazon ones support up to 200lbs so plenty for your top along with triple monitors and a cup holder for you cocktail (oh wait, that's my set-up) Dave2739 and ThothAmon 2 Link to comment Share on other sites More sharing options...
Kerdese Posted February 19, 2023 Share Posted February 19, 2023 On 2/19/2023 at 5:15 PM, lizards2 said: You have nice lips. You too! lizards2 1 Link to comment Share on other sites More sharing options...
Domo Arigato Posted February 20, 2023 Share Posted February 20, 2023 (edited) On 2/19/2023 at 5:01 PM, batman_fan said: Amazon has a decent selection at a reasonable price. Just make sure to get a dual motor. I may have to use fixed legs because my top is about 300lbs. Check out Blacktail Studio on YouTube. He's a table/furniture maker that does incredible work, and recently made a sit/stand desk similar to what you're looking to do. When he demonstrates the lift mechanism towards the end of the video (at around the 23:20 mark) he mentions that the Flexispot base he used is rated for up to 355 lbs. Looks like he used their E7 T-Frame here, which is good for desks from 47.2" to 80" in width ......but, unfortunately, it's pretty pricey. I couldn't afford his stuff, but his videos are still interesting to watch. Here's his video on making the lift desk. I've queued it up to where he starts talking about and installing the lift base on the desk. Edited February 20, 2023 by Domo Arigato Jayman and ADAMANTIUM 2 Link to comment Share on other sites More sharing options...
DELTA 62 Posted February 20, 2023 Share Posted February 20, 2023 On 2/19/2023 at 4:10 PM, Kerdese said: Here are some better photos. Thanks! Kerdese 1 Link to comment Share on other sites More sharing options...
batman_fan Posted February 20, 2023 Share Posted February 20, 2023 On 2/19/2023 at 9:34 PM, Domo Arigato said: Check out Blacktail Studio on YouTube. He's a table/furniture maker that does incredible work, and recently made a sit/stand desk similar to what you're looking to do. When he demonstrates the lift mechanism towards the end of the video (at around the 23:20 mark) he mentions that the Flexispot base he used is rated for up to 355 lbs. Looks like he used their E7 T-Frame here, which is good for desks from 47.2" to 80" in width ......but, unfortunately, it's pretty pricey. I couldn't afford his stuff, but his videos are still interesting to watch. Here's his video on making the lift desk. I've queued it up to where he starts talking about and installing the lift base on the desk. He is one of my follows on YouTube. He is really good about disclosing how he does everything. Link to comment Share on other sites More sharing options...
Gonzimodo Posted February 20, 2023 Share Posted February 20, 2023 On 2/19/2023 at 5:16 AM, Kerdese said: I think I also still have that Jim Lee X-Men poster tucked away somewhere. Room looks great! Kerdese 1 Link to comment Share on other sites More sharing options...
F For Fake Posted February 20, 2023 Share Posted February 20, 2023 On 2/19/2023 at 6:10 PM, Kerdese said: Here are some better photos. They're great. I have some that I've been using for nearly 10 years, and have never had a problem with them. Occasionally you'll need to tighten up your set screws, as gravity will pull the two ends apart, but it's not a big deal. Kerdese and ADAMANTIUM 2 Link to comment Share on other sites More sharing options...
rexinnih Posted February 21, 2023 Share Posted February 21, 2023 I also use them for those I display on the shelf. Haven't done the wall hanging but maybe some day. Kerdese and F For Fake 2 Link to comment Share on other sites More sharing options...
ADAMANTIUM Posted February 21, 2023 Share Posted February 21, 2023 On 2/20/2023 at 2:08 PM, F For Fake said: They're great. I have some that I've been using for nearly 10 years, and have never had a problem with them. Occasionally you'll need to tighten up your set screws, as gravity will pull the two ends apart, but it's not a big deal. On 2/20/2023 at 6:03 PM, rexinnih said: I also use them for those I display on the shelf. Haven't done the wall hanging but maybe some day. Sweet! My main issue is space! It's almost like it's a final frontier or something F For Fake 1 Link to comment Share on other sites More sharing options...
Telegan Posted February 21, 2023 Share Posted February 21, 2023 On 2/19/2023 at 5:10 PM, djpinkpanther67 said: Here’s my comic room in all its glory. Don’t judge. It’s mostly unfinished. Mostly. Yup. That's a comic room. Gonzimodo, ADAMANTIUM and Sandflea 1 2 Link to comment Share on other sites More sharing options...
ADAMANTIUM Posted February 21, 2023 Share Posted February 21, 2023 On 2/20/2023 at 7:50 PM, Telegan said: Yup. That's a comic room. I haven't posted pics as of late, and for the same reason, gently trying to straighten it up and out! Link to comment Share on other sites More sharing options...
Telegan Posted February 21, 2023 Share Posted February 21, 2023 (edited) On 2/20/2023 at 9:19 PM, ADAMANTIUM said: I haven't posted pics as of late, and for the same reason, gently trying to straighten it up and out! I only said what I said because after about 2 or 3 shipments, my home office ends up looking like that. About the best part is when it's clean again... for a few days, anyway. Well, that and the tons of glorious bubble wrap I save up to pop to release stress or just to pop it for fun. Yeah, I'm odd like that. Edited February 21, 2023 by Telegan ADAMANTIUM 1 Link to comment Share on other sites More sharing options...